How To Change A Bathtub Faucet

How to Change a Bathtub Faucet: A Comprehensive Guide

Whether you're tackling a bathroom remodel or simply upgrading an outdated faucet, changing a bathtub faucet is a task that can be accomplished with some basic tools and a little bit of know-how. Here's a comprehensive guide to help you do it like a pro:

Gather Your Tools:
Before you start, make sure you have the necessary tools on hand: adjustable wrench, Allen wrench, screwdriver, plumber's putty, Teflon tape, and a bucket for collecting water.

Turn Off the Water Supply:
Locate the shut-off valves under the sink or behind the washing machine. Turn them clockwise to stop the flow of water to the bathtub.

Disconnect Old Faucet:
Use an adjustable wrench to loosen the nuts that secure the faucet to the water lines. Once they're loose, pull the faucet away from the tub deck.

Clean the Surface and Apply Plumber's Putty:
Thoroughly clean the area where the new faucet will sit. Apply a generous bead of plumber's putty around the base of the faucet.

Install New Faucet:
Fit the new faucet into place over the plumber's putty. Tighten the nuts by hand, then use an adjustable wrench to secure them further. Ensure the faucet is level and straight.

Connect Water Lines:
Attach the water lines to the faucet's connections. Use Teflon tape to wrap around the threads of the water lines for a secure seal. Hand-tighten the connections and then use an adjustable wrench to tighten further.

Test for Leaks:
Turn on the water supply and check for any leaks. If you find any, tighten the connections further. Also, check around the base of the faucet for any leaks.

Remove Excess Plumber's Putty:
Use a damp cloth to wipe away any excess plumber's putty that may have squeezed out. Let the putty dry completely before using the faucet.

Congratulations!
You've successfully changed your bathtub faucet. Now you can enjoy a fresh, updated look and the satisfaction of a job well done.