Remove Bathtub Drain Stopper

How to Remove a Bathtub Drain Stopper: A Comprehensive Guide

A clogged bathtub drain is a common plumbing problem that can cause water to back up and overflow. In most cases, the clog is caused by hair, soap scum, and other debris that has accumulated in the drain over time. To clear the clog, you'll need to remove the bathtub drain stopper. Tools You'll Need:

Pliers
A flat-head screwdriver
A bucket
A wet/dry vacuum

Instructions: 1. Prepare the Bathtub

Turn off the water supply to the bathtub.
Open the drain valve and let the water drain out.
Place a bucket underneath the drain to catch any remaining water.

2. Remove the Overflow Plate

Locate the overflow plate on the side of the bathtub, near the top.
Use a flat-head screwdriver to pry off the overflow plate.
Set the overflow plate aside.

3. Remove the Drain Stopper

Look inside the drain hole and locate the drain stopper.
Use pliers to grip the drain stopper and turn it counterclockwise.
Continue turning the drain stopper until it comes loose and you can remove it.

4. Clean the Drain Stopper and Drain

Inspect the drain stopper for any hair, soap scum, or other debris.
Use a wet/dry vacuum to clean the drain stopper and the drain.
Rinse the drain stopper and drain with hot water.

5. Reinstall the Drain Stopper

Insert the drain stopper into the drain hole.
Turn the drain stopper clockwise until it is snug.
Reinstall the overflow plate.

6. Test the Drain

Turn on the water supply to the bathtub.
Open the drain valve and let the water run.
Check for any leaks.

Additional Tips:

If you have a pop-up drain stopper, you may need to use a special tool to remove it.
If the drain stopper is stuck, you can try using a penetrating oil to loosen it.
If you are unable to remove the drain stopper yourself, you may need to call a plumber.

By following these steps, you can easily remove a bathtub drain stopper and clear a clogged drain.