Replace Trip Lever Bathtub Drain

Sure, here is the article about how to replace a trip lever bathtub drain:

Replace a Trip Lever Bathtub Drain

A trip lever bathtub drain is a common type of bathtub drain that is operated by a lever that is located on the overflow plate. When the lever is lifted, the drain is opened, and when the lever is lowered, the drain is closed. If your trip lever bathtub drain is not working properly, you may need to replace it.

Tools and Materials Needed

- Adjustable wrench - Plumber's putty - New trip lever bathtub drain - Screwdriver - Utility knife

Steps to Replace a Trip Lever Bathtub Drain

1. Turn off the water supply to the bathtub. There are usually two shut-off valves under the sink that control the hot and cold water to the bathtub. Turn the valves clockwise to turn off the water. 2. Use the adjustable wrench to loosen the locknut that is located on the overflow plate. The locknut is usually made of brass or plastic. 3. Once the locknut is loose, you can remove the overflow plate by pulling it straight out. Be careful not to drop the overflow plate into the drain. 4. Use the screwdriver to remove the screws that are holding the trip lever in place. There are usually two screws that are located on the top of the trip lever. 5. Once the screws are removed, you can remove the trip lever by pulling it straight out. 6. Use the utility knife to cut away the old plumber's putty from the bottom of the overflow plate. 7. Apply a new bead of plumber's putty to the bottom of the overflow plate. 8. Insert the new trip lever into the overflow plate. 9. Secure the trip lever in place with the screws. 10. Replace the overflow plate. 11. Tighten the locknut. 12. Turn on the water supply to the bathtub and check for leaks.

Tips for Replacing a Trip Lever Bathtub Drain

- If you are having trouble removing the old trip lever, you can try using a penetrating oil to loosen the screws. - Be careful not to overtighten the locknut when you are replacing the overflow plate. Overtightening the locknut can damage the overflow plate. - If you are not comfortable working with plumbing, you can call a plumber to replace the trip lever bathtub drain for you.

Conclusion

Replacing a trip lever bathtub drain is a relatively easy project that can be completed in about 30 minutes. By following the steps in this article, you can save yourself the cost of hiring a plumber.