How To Clean Old Bathtub

How to Clean an Old Bathtub: A Step-by-Step Guide

If you're like most homeowners, you probably don't clean your bathtub as often as you should. But if you have an old bathtub, it's especially important to keep it clean and free of dirt, grime, and soap scum. Otherwise, the finish can become damaged and the bathtub can start to look dingy and outdated. Here is a step-by-step guide on how to clean an old bathtub: 1.

Gather Your Supplies

You will need the following supplies: * All-purpose cleaner or degreaser * Baking soda * White vinegar * Sponge or cloth * Scrub brush * Bucket * Gloves * Safety goggles 2.

Prepare the Bathtub

Before you start cleaning the bathtub, make sure it is empty and dry. Remove any bath mats or curtains, and close the drain. 3.

Apply All-Purpose Cleaner

Apply a liberal amount of all-purpose cleaner or degreaser to the bathtub. Be sure to cover the entire surface, including the sides, bottom, and drain. 4.

Let the Cleaner Sit

Allow the cleaner to sit on the bathtub for the amount of time specified on the product label. This will give the cleaner time to break down the dirt and grime. 5.

Scrub the Bathtub

Once the cleaner has had a chance to sit, use a sponge or cloth to scrub the bathtub. Be sure to pay special attention to areas that are particularly dirty, such as the drain and the corners. 6.

Rinse the Bathtub

Rinse the bathtub thoroughly with clean water. Make sure to remove all of the cleaner. 7.

Apply Baking Soda and Vinegar

Sprinkle a generous amount of baking soda over the entire surface of the bathtub. Then, pour white vinegar over the baking soda. The mixture will start to fizz and bubble. This is a natural way to remove soap scum and stains. 8.

Let the Mixture Sit

Allow the baking soda and vinegar mixture to sit on the bathtub for 15-30 minutes. This will give the mixture time to work its magic. 9.

Scrub the Bathtub

Once the mixture has had a chance to sit, use a scrub brush to scrub the bathtub. Again, pay special attention to areas that are particularly dirty. 10.

Rinse the Bathtub

Rinse the bathtub thoroughly with clean water. Make sure to remove all of the baking soda and vinegar mixture. 11.

Dry the Bathtub

Use a clean towel to dry the bathtub. This will help to prevent water spots. 12.

Finish Up

Replace the bath mats and curtains, and open the drain. You can now enjoy your clean and fresh bathtub!

Additional Tips for Cleaning an Old Bathtub

* If your bathtub is particularly dirty, you may need to repeat steps 3-11. * You can also use a commercial bathtub cleaner instead of all-purpose cleaner or degreaser. * If you have a fiberglass bathtub, avoid using harsh chemicals, as they can damage the finish. * Be sure to wear gloves and safety goggles when cleaning the bathtub. This will protect your skin and eyes from the chemicals. * Clean the bathtub regularly to prevent dirt and grime from building up. This will make it easier to clean and will help to keep it looking its best.