Bathtub Pop Up Drain Replacement

Bathtub Pop Up Drain Replacement: A Step-by-Step Guide

Having a faulty pop-up drain in your bathtub can be a major inconvenience. It can lead to water leaks, slow drainage, and other problems. If you're facing this issue, don't worry - replacing a pop-up drain is a relatively easy task that you can do yourself with a few tools and some basic plumbing knowledge. In this comprehensive guide, we'll provide you with step-by-step instructions on how to replace a pop-up drain in your bathtub. We'll cover everything from gathering the necessary tools and materials to removing the old drain and installing the new one. So, let's get started! ### What You'll Need Before you begin, make sure you have the following tools and materials: * Adjustable wrench * Phillips head screwdriver * Flat head screwdriver * Plumber's putty * New pop-up drain assembly * Bucket * Rags * Safety goggles * Gloves ### Step-by-Step Instructions 1.

Prepare the Area:

- Turn off the water supply to your bathtub. - Place a bucket underneath the drain to catch any water that may leak out. - Cover the drain opening with a rag to prevent small parts from falling into the drainpipe. - Put on safety goggles and gloves to protect yourself. 2.

Remove the Old Drain:

- Use the adjustable wrench to loosen the drain nut located underneath the bathtub. - Once the nut is loose, remove it by hand. - If the drain is stuck, use the flat head screwdriver to pry it loose. - Be careful not to damage the bathtub surface. 3.

Clean the Drainpipe:

- Use the rag to clean the inside of the drainpipe. - Remove any debris or buildup that may be present. 4.

Apply Plumber's Putty:

- Take a small amount of plumber's putty and roll it into a snake-like shape. - Apply the putty around the base of the new drain assembly. - Make sure to create a seal between the drain assembly and the drainpipe. 5.

Install the New Drain:

- Insert the new drain assembly into the drainpipe. - Hand-tighten the drain nut until it's snug. - Use the adjustable wrench to tighten the nut further, but don't overtighten it. 6.

Test the Drain:

- Turn on the water supply to your bathtub. - Check for leaks around the drain. - If there are no leaks, press the pop-up stopper to open and close the drain. - Make sure the stopper opens and closes smoothly. 7.

Clean Up:

- Remove the bucket and rag from underneath the drain. - Wipe up any water spills. - Dispose of the old drain assembly and any leftover plumber's putty. ### Troubleshooting Tips * If you're having trouble removing the old drain nut, try using a penetrating oil to loosen it up. * If the new drain assembly doesn't fit properly, check to make sure you have the right size. * If the drain is still leaking after you've installed the new assembly, try tightening the drain nut further. ### Conclusion Replacing a pop-up drain in your bathtub is a relatively easy task that can be completed in just a few steps. By following the instructions in this guide, you can save yourself the cost of hiring a plumber and have a functioning bathtub drain in no time. Remember to always take safety precautions when working with plumbing fixtures, and if you encounter any issues that you're not comfortable handling, don't hesitate to call a professional plumber for assistance.