Bathtub Faucet Dripping From Spout

# Bathtub Faucet Dripping From Spout: Causes and Solutions

A dripping bathtub faucet is not only annoying, but it can also waste a lot of water and increase your water bill. If you're dealing with this problem, don't worry - it's usually a quick and easy fix. In this article, we'll discuss the common causes of a bathtub faucet dripping from the spout and provide step-by-step instructions on how to fix it. #### Causes of a Bathtub Faucet Dripping From the Spout There are several potential causes of a bathtub faucet dripping from the spout. The most common ones include: *

Worn-out rubber washer:

The rubber washer is a small, round seal that sits between the faucet stem and the faucet body. Over time, the rubber washer can become worn or damaged, which can cause a leak. *

Damaged O-ring:

The O-ring is a small, round seal that sits between the faucet spout and the faucet body. Like the rubber washer, the O-ring can become worn or damaged over time, leading to a leak. *

Loose or damaged packing nut:

The packing nut is a threaded nut that holds the faucet stem in place. If the packing nut is loose or damaged, it can allow water to leak past the stem. *

Damaged faucet stem:

The faucet stem is a cylindrical piece of metal that controls the flow of water through the faucet. If the faucet stem is damaged, it can leak water from the spout. #### How to Fix a Bathtub Faucet Dripping From the Spout 1.

Gather the necessary tools and materials:

* Adjustable wrench * Phillips head screwdriver * Flat head screwdriver * New rubber washer * New O-ring * Teflon tape * Rag 2.

Turn off the water supply to the faucet:

Locate the water supply valves for the bathtub faucet. These valves are usually located under the sink or behind the bathtub. Turn the valves clockwise to turn off the water supply. 3.

Remove the faucet aerator:

The faucet aerator is the small, screen-like attachment at the end of the faucet spout. Unscrew the aerator by turning it counterclockwise. 4.

Remove the faucet spout:

Use the adjustable wrench to loosen the nut that holds the faucet spout in place. Once the nut is loose, pull the spout straight up to remove it. 5.

Inspect the rubber washer and O-ring:

Look at the rubber washer and O-ring for signs of wear or damage. If either of these seals is worn or damaged, replace it with a new one. 6.

Wrap the faucet stem with Teflon tape:

Apply a few layers of Teflon tape to the threads of the faucet stem. This will help to create a tight seal and prevent leaks. 7.

Reinstall the faucet stem:

Insert the faucet stem back into the faucet body. Tighten the packing nut until it is snug. 8.

Reinstall the faucet spout:

Align the faucet spout with the faucet body and push it straight down until it is fully seated. Tighten the nut that holds the spout in place. 9.

Reinstall the faucet aerator:

Screw the faucet aerator back onto the end of the faucet spout. 10.

Turn on the water supply to the faucet:

Turn the water supply valves counterclockwise to turn on the water supply. Check the faucet for leaks. If there are no leaks, the repair is complete. #### Conclusion A bathtub faucet dripping from the spout is a common problem that can be easily fixed with a few simple tools and materials. By following the steps outlined in this article, you can quickly and easily stop the leak and save yourself money on your water bill.