How To Get Hair Out Of Bathtub Drain

Introduction Dealing with a clogged bathtub drain due to hair accumulation can be frustrating, leading to slow drainage or even complete blockage. However, with the right techniques and tools, you can easily remove the hair and restore the proper functioning of your drain. Here's a step-by-step guide on how to get hair out of the bathtub drain: Step 1: Gather Necessary Tools Before starting, make sure you have all the necessary tools and materials at hand: * Drain snake or auger * Screwdriver (for removing the drain cover) * Pliers (for gripping hair clumps) * Boiling water * White vinegar * Baking soda * Plunger (optional) Step 2: Remove the Drain Cover Locate the drain cover in the center of the bathtub drain. Using a screwdriver, carefully pry the drain cover loose and lift it out. Be mindful not to drop any screws or parts into the drain. Step 3: Use a Drain Snake or Auger Insert the drain snake or auger into the drain opening. Slowly feed it down the drain, turning the handle or crank to advance it further. As you push the drain snake or auger deeper, it will catch and hook onto the hair buildup, allowing you to pull it out. Continue this process until you feel resistance or see a significant amount of hair being retrieved. Step 4: Remove Hair Clumps with Pliers If the hair buildup is too thick for the drain snake or auger to remove effectively, you can use pliers to grasp and pull out the hair clumps. Reach into the drain opening with the pliers and grip a clump of hair. Gently pull it out, taking care not to break the hair or push it further down the drain. Repeat this process until you've removed as much hair as possible. Step 5: Pour Boiling Water Down the Drain Once you've removed the bulk of the hair buildup, pour a pot of boiling water slowly down the drain. The hot water will help dissolve any remaining hair strands and grease, facilitating easier drainage. Step 6: Use White Vinegar and Baking Soda Create a natural cleaning solution by mixing equal parts of white vinegar and baking soda. Carefully pour the mixture down the drain and let it sit for at least 30 minutes. The vinegar and baking soda will react, creating a fizzing action that helps break down and dissolve the hair and grime buildup. Step 7: Rinse with Hot Water After the cleaning solution has had time to work, rinse the drain thoroughly with hot water. Run the hot water for a few minutes to flush out the loosened hair, debris, and the vinegar-baking soda mixture. Step 8: Check Drainage and Repeat if Necessary Check the drainage flow of your bathtub. If the water is still draining slowly or not at all, you may need to repeat the process of using the drain snake or auger, pliers, and cleaning solution until the drain is completely clear. Step 9: Use a Plunger (Optional) In some cases, a plunger can be helpful in dislodging stubborn hair clogs. Place the plunger over the drain opening and push and pull it vigorously to create suction and pressure. This can help break up and loosen the hair buildup, allowing it to flow down the drain. Step 10: Prevent Future Clogs To prevent future hair clogs in your bathtub drain, consider using a hair catcher or strainer to trap hair before it enters the drain. Regularly cleaning the drain cover and surrounding area can also help prevent hair buildup. Conclusion By following these steps and using the appropriate tools and cleaning solutions, you can effectively remove hair from your bathtub drain and restore its proper functioning. Regular maintenance and prevention measures will help keep your bathtub drain clog-free and ensure smooth drainage.